Bolt-on cutting edges extend the life of a bucket by adding a wear edge to the front of the bucket. Bolt-on edges have a double bevel so they are reversible - extending the life of the edge itself. Bucket weld-on shanks with replaceable teeth and pins are also available. Hole spacing for our cutting edges is 6" on center with 5/8" hardware. All cutting edges come with hardware to bolt them on.
Available lengths for cutting edges
60"
68"
72"
78"
80"
84"
90"
96"
108"
120"
Available in straight.
Pinned 42" Big spears and 32" tapered spears.
(BUILD YOUR OWN SKID STEER ATTACHMENT!)
We offer three different types.
1. Standard one piece plate with a 5/16" back and 3/8" top.
2. Two piece version with the same steel thickness back and top.
3. HD version that is made of 1/2" steel back and top, with reinforced pin locking holes. Build a heavy duty piece of equipment at home.
Make your own tooth bar or replace broken teeth from buckets or other pieces of equipment. We only offer one size which is the same size used in all skid steer attachments as a standard.
We offer two different lengths: 6 foot and 8 foot and both should fit 4" and 5" wide forks. They will accommodate 1 3/4" thick forks. (Retaining Pins are not provided)
48" 3500lb and 5500lb fork sets
72" 5500lb fork sets (not pictured)
Bare Fork Backer (for people that already have a set of forks)
